Filter
Top Products
Part C:
Connect ZvBox to coax cabling
Begin Part C when you have been instructed to do so by the Zv Installation Wizard
1. Connect ZvBox to a coaxial cable connection near your computer as shown.
If the coaxial cable connection is unused:
If the coaxial cable connection is in use (by a modem, set-top
box, TV, or other device):
2. After you connect ZvBox to your home’s coaxial cabling, click “Next” in the “Connect ZvBox”
screen on your computer, then follow the instructions on-screen. The Zv Installation Wizard will
create a new channel for you. Use the space below to write down the channel number shown on
the Zv Installation Wizard.
Your Zv channel number:
8
© 2008, ZeeVee, Inc. All rights reserved.
Cable Modem users:
If you connect ZvBox
to a coax cable that’s
attached to a cable
modem, test your
modem after you make
the connection.
If your cable modem
no longer functions
as before, please
use another coax
cable connection.
If you move ZvBox
to another coax cable
not attached to a cable
modem, move your
channel filter to the
position shown in
the bottom diagram
on Page 3.
New or existing
coaxlal cable
To coaxial cable wall jack
Existing coaxial cable
New coaxial cables
(supplied)
New splitter (supplied)
Cable modem, set-top
box, or other device
Zv_Guide_Mech8.qxd:zv data sheet copy.qxd 7/28/08 1:53 PM Page 10