Zenith 206-3923 CRT Television User Manual


 
20
1
2
3
4
5
6
7
8
9
10
11
Press MENU/ENTER. The menu screen appears.
Press
or
to select (OPTION)
menu.
Press
or to select “V-CHIP”.
Press
to display the password
entering mode. Use number buttons
(0-9) to enter your password, then
press MENU/ENTER. The V-CHIP
menu appears.
Press
or to select “V-CHIP SET”,
then press
. The V-CHIP SET menu
appears.
Press
or to select “TV RATING”,
then press
or
to display the desired
rating.
OFF : TV RATING is not set
TV-Y : All children
TV-Y7 : 7 years old and above
TV-G : General audience
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
• When you select TV-Y7, TV-PG,
TV-14, or TV-MA, press –/DISPLAY
to further de ne the rating.
Press
or to select the desired rating you want.
Press or to select the setting “ON” or “OFF”.
Press or to select “MOVIE
RATING”, then press .
The RATING SET menu appears.
Press or to select the rating,
then press
or
to select “ON” or
“OFF” for each rating.
G : All ages
PG : Parental guidance
PG-13 : Parental guidance less than 13 years old
R : Under 17 years old parental guidance suggested
NC-17 : 17 years old and above
X : Adult only
Press MENU/ENTER twice to return to the V-CHIP menu,
then press
or
to select “V-CHIP”.
Press
or to select “ON”. Your settings are now set into memory.
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
To use the TV after the TV is protected.
When a program is received that is blocked
by the V-Chip, enter the password, then press
MENU/ENTER. When the password is entered
correctly the protection will be temporarily
overridden.
If the TV is turned off, or the channel is changed
the V-Chip restriction will be reactivated.
NOTES:
The V-Chip function is activated only on
programs and input sources that include a
rating signal.
The V-CHIP SET (DTV) will only be selectable
when the unit receives a digital broadcast using
the new rating system. It may take several
minutes for the initial V-Chip Set-up to complete.
At this time some stations are still developing
this signal, in those cases the V-CHIP SET
(DTV) will not function.
Setting the V-Chip (continued)
To set the V-CHIP
J33A0621B_EN.indb 20J33A0621B_EN.indb 20 1/31/08 5:31:32 PM1/31/08 5:31:32 PM