Filter
Top Products
PAGE 16 CONNECTIONS
Connecting to Optional Equipment
Enjoying Dolby Pro Logic Surround Sound
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
COMPONENT
VIDEO OUT
Y
Pr
Pb
S-VIDEO
OUT
L
1 2
R
VIDEO
OUT
To ANALOG
AUDIO OUT
To VIDEO OUT
Video cable
Connection example
Amplifier equipped
with Dolby Pro
Logic Surround
Front
speaker
(left)
Front
speaker
(right)
To video input
Rear speaker
(left)
Rear speaker
(right)
TV
Center speaker
To audio input
Audio cable
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the coaxial digital audio jack of
this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hear-
ing as well as the speakers. (Refer to “Selecting Digital Audio Output” on page 39.)
Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decod-
ing. If your A/V receiver has a Dolby Pro Logic decoder. Refer to the following connection diagram.
Connect one or two
rear speakers.
The output sound from
the rear speakers will
be monaural even if
you connect two rear
speakers.
●
With a receiver equipped with Dolby Digital (AC-3)
Connect the equipment the same way as described in “Enjoying Dolby Digital (AC-3) Sound” on the previous page. Refer
to that receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.