Zenith S2898A CRT Television User Manual


 
15
ENGLISH
Automatic memory tuning
To add or delete channels (ANALOG MODE)
Press MENU/ENTER. The menu screen will appear.
Press
or
to select
(SETUP)
menu, then press
or to select
“AUTO CH MEMORY”.
Press . The TV will begin
memorizing all the channels
available in your area.
After nishing Analog Tuning,
Digital Tuning starts automatically.
It may take from 15 minutes to 30
minutes to complete memorizing
digital cable channels. Depending on the reception condition,
a BAR display may not advance for several minutes.
Press ANALOG/DIGITAL to select the analog mode.
Press MENU/ENTER. The menu screen appears.
Press
or
to select
(OPTION)
menu, then press
or to select
“ADD/DELETE”.
Press
. The ADD/DELETE menu
appears.
Select the desired channel to be
memorized or deleted using or .
Press
or
to select “ADD” or “DELETE”.
Repeat steps 5-6 for other channels you want to add or delete.
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
1
2
3
1
2
3
4
5
6
7
8
NOTES:
Memorizing channels is best
accomplished during evening
“PRIMETIME” hours, as more stations
are broadcasting digital signals.
Memorizing channels can only be
accomplished while a station is
broadcasting a digital signal to set
that channel into memory.
If you are unsure of the digital channels
available in your area you may visit
www.antennaweb.org to receive a list
based on your address or zip code.
Should you require further assistance
you may call our toll-free customer
service line at 1-888-865-3026.
New digital channels may be added
to your area periodically, it is
recommended that you perform the
“AUTO CH MEMORY” procedure
regularly.
Memorizing channels (continued)
J33A0621B_EN.indb 15J33A0621B_EN.indb 15 1/31/08 5:31:13 PM1/31/08 5:31:13 PM