ZyXEL Communications STB-1001H DVR User Manual


 
ENGLISH
4
V If the or lights do not behave as expected, first check the STB-
1001H’s connections. Make sure that the power is on and the Internet
access device is working. If this does not help, restart the STB-1001H
(switch it off, then on using the ON/OFF switch on the rear panel). If the
problem persists, contact your vendor.
3 A start-up picture displays on the television. When the STB-1001H has successfully
started up, the Home menu displays. Your STB-1001H is ready to use!
" The TV pictures shown in this Quick Start Guide are examples; what you see
may be different (depending on your IPTV service provider).
3 Use the Remote Control
Before you first use the remote control, take the following steps to insert two AAA-size
batteries.
1 Press the battery cover release catch in and lift the cover off.
2 Press the batteries into the compartment. The negative (-) end of each battery should
be at the end of the slot that has a spring.
3 Replace the cover.
EXAMPLE