A SERVICE OF

logo

Adding TCP/IP to Your Protocols List 35
The Select Network Protocol dialog box appears.
Figure 18 Select Network Protocol Dialog Box
4 From the Manufacturers list box, select Microsoft, and then from the Network
Protocols list box, select TCP/IP.
5 Click OK to exit the Select Network Protocol Dialog box.
6 Click OK again to exit the Network Dialog box.
You may be prompted to re-boot your workstation.
7 Run the EZ-LAN Wizard again to optimize the settings on your workstation.
Windows NT 4.0 To add TCP/IP to your protocols list for Windows NT 4.0:
You may need your Windows NT 4.0 installation CD-ROM.
1 From the Control Panel, double-click Network.
The Network dialog box appears.