Installing an OS/2 Client Driver for NetWare 3-11
12 Click COPY and follow the displayed instructions.
Continue the installation and insert the appropriate OS/2
Requester diskettes when prompted.
After the OS/2 Utility diskette is installed, a window
appears that requests information about the ODI LAN
drivers. The default ODI LAN driver is TLNKPODI.SYS.
13 Insert TokenDisk diskette #1 or the TokenDisk CD in
the appropriate drive.
14 Select Copy Only the Default Driver and click OK.
15 Follow the displayed installation instructions and
insert the appropriate OS/2 Requester diskettes
when prompted.
When the installation is complete, a menu appears with the
following menu bar items:
■ Installation
■ Configuration
■ Utilities
■ Readme
■ Help
A message is displayed, stating that the installation process
is complete. Follow the instructions, and continue with
configuration steps in the following section.
Configuring the Novell OS/2 Requester
When you have followed the displayed instructions at
the end of the Novell OS/2 Requester installation process,
a message appears concerning certain configuration
requirements.
After reading the message regarding configuration
requirements, follow these steps:
1 Click the Configuration menu bar item and select
“This Workstation...” to check the NET.CFG file for
the proper NIC configuration.
2 Verify the link driver header, node address, and
frame type.
Book Page 11 Saturday, November 1, 1997 3:13 PM
