2–Pump 12-Station Controllers Chapter 3: Installation 20
ALL NORMAL MODE?
NO/YES
ALL SIGHTGLASS MODE?
NO/YES
STATION: 1 NORMAL
Y=NORMAL N=SIGHTGLS
To set all the stations to Normal mode and return to the Station Settings menu:
• Press the YES key at the following screen prompt.
This function lets you use the fast setup feature of the controller. Normal mode is the factory
default, so if no sight glass loaders are on your system, you won’t need to alter this setting.
Pressing the NO key moves to the All Sight Glass Mode screen. Again, this function lets you
quickly change all stations to Sight Glass mode if all stations have sight glass loaders.
To move on to the individual settings screen:
• Press the NO key.
The following screen displays.
Starting with Hopper 1, the controller now lets you individually set the operation mode of
each station.
1. Press the YES key to set the station to Normal mode.
2. Press the NO key to set the station to the Sight Glass mode.
3. Press the SET key to save the new setting into controller memory and increment to
the next station in sequence.
4. Press the CLEAR key to exit to the Station Settings menu.
