Chapter 2. Installation
2-2 Express 4100/4110 User Manual 61200176L2-1
TELEPHONE CONNECTION (4110 ONLY)
Basic Telephone Service
The Express 4110 supports an analog DTMF telephone type (AT&T 2500)
with the POTS interface, part number 1200176L2. Two telephones or
other analog devices (like a fax machine or modem) plug into either RJ-11
jack (labeled with drawings of telephones) on the rear of the unit. Using a
multipoint line allows the POTS and data port to have unique phone
numbers.
Supplementary Services
Supplementary services such as call holding, three- or six-way conferenc-
ing, call transfer, and call waiting are fully supported by the Express
4100/4110 on a touch-tone telephone. Table 2-1 explains how the flash-
hook is used for handling multi-call situations.
DTMF Keypad
The following functions are performed on a touch-tone phone:
Disable call waiting: Press
**0
Enable call waiting: Press
**1
Redial last number: Press
**5
Enable ExpertISDN: Press
**6
Enter Area Code: Press
**7XXX
(where XXX is a 3-digit
area code. This must be entered first,
before enabling ExpertISDN.)
Enter Phone Number 1: Press
**8XXXXXXX
(where XXXXXXX
is the 7- digit phone number. This must
be entered before enabling Exper-
tISDN.)
Enter Phone Number 2: Press
**9XXXXXXX
(where XXXXXXX
is the 7-digit phone number. If only one
phone number is assigned, this does not
have to be entered.)
