Installation
34 Instruction manual BFM
3
is
3.9.11 C33 concentric roof flue terminal specifications (BFM 100, 120)
C33 concentric roof flue terminal specifications
3.10 Electrical
connection
Warning
The installation should be carried out by an authorised installation engineer,
in compliance with general and local regulations (1.3 "Regulations").
This paragraph describes the electrical connections.
The figure shows a view of the electrical connector block, and the table shows
the appropriate connections.
Connector block
Subject Description
Roof flue terminal set:
• 1x Wall flue terminal (incl. clamping
ring)
• 1x Pipe 1000 mm
• 1x Mounting flange
Art. No. 0306 773
1
Construction Concentric
Manufacturer Muelink & Grol
Type M2000 DDV SE
Pipe material Construction Parallel
Chimney flue Thick-walled aluminium with lip ring seal
Air supply Thick-walled aluminium with lip ring seal
Pipe diameters Chimney flue Ø 130 mm
Air supply Ø 130mm
(1) No other roof flue terminal is permitted. Order the roof flue terminal set from manufacturer or trade supplier,
stating the article number.
Legend
A. screws
B. protective cap
C. connector block
B
C
1
10
IMD-
24
R1
