![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/ea/7eaa097b-d189-4bb5-bdf6-e2e2808b7a90/7eaa097b-d189-4bb5-bdf6-e2e2808b7a90-bg35.png)
Instruction manual GWV 53
gis
8 Status of the
appliance
8.1 Introduction
Topics covered in this chapter, in sequence:
• Operating modes
• Error conditions
• Service condition
• Warning
8.2 Operating modes
When running, the appliance has four basic operating
modes, namely:
•
OFF
•
ON
•
PROG
•
EXTRA
8.2.1
OFF
In this mode, the frost protection is activated. The
figure shows the display with the following information:
• line one: the text
OFF
• line two: the time, the day and T
3
• lines three and four: the text
FROST PROTECTION ACTIVATED
.
8.2.2
ON
In this mode, the appliance continually responds to the
hot water demand. The figure shows the display with
the following information:
• line one: the text
ON
;
• line two: the time, the day and T
1
and T
3
alternately (2.3 "The appliance's heating cycle").
• line three: the programmed water temperature
T
set
;
• line four: is empty when the appliance is idle, or
depending on the heating cycle (2.3 "The
appliance's heating cycle"), displays a text such as
HEAT DEMAND
.
8.2.3
PROG
In this mode a preset week program is active, and the
appliance responds continually to demand within the
time periods set in the week program. There are two
distinct situations possible in this mode:
1. The current time falls within a set time period
of the week program.
The figure shows the display with the following
information:
- line one: the text
PROG
;
- line two: the time, the day and T
1
and T
3
alternately (2.3 "The appliance's heating
cycle");
- line three: the next scheduled switch-off time
and the water temperature
Tse t
of the active
period;
- line four: is empty when the appliance is idle,
or depending on the heating cycle (2.3 "The
appliance's heating cycle"), displays a text
such as
HEAT DEMAND
.
2. The current time falls outside a set time period
of the week program.
The figure shows the display with the following
information:
- line one: the text
PROG
;
- line two: the time, the day
and T
3
alternately (2.3 "The appliance's heating
cycle");
- line three: the next scheduled switch-on
time;
- line four: displays the text
PERIOD ACTIVATED
.
OFF
13:45 Thursday 6ÉC
FROST PROTECTION
ACTIVATED
ON
13:45 Thursday 67ÉC
Tset 75ÉC
PROG
10:00 Monday 76ÉC
MO 11:15 Tset 75ÉC
PROG
12:00 Monday 76ÉC
MO 11:15
PERIOD ACTIVATED