32 33
SETUP MENU
HOW TO ENTER THE SETUP MENU TO CHANGE SETTINGS
Press [MENU] to enter the main menu.
Press [SETUP] to enter the setup menu.
Press
or
flashes.)
[DONE][CANCEL] to exit
without saving.
The Home Comfort Control will discard changes and exit
if nothing is pressed within 60 seconds.
Press [Next] or [Back] to page through the settings
(the setting is displayed in the message center).
MESSAGE CENTER
(SCROLLING TEXT)
USER SYSTEM SETTINGS TABLE
SETUP MENU
bold.
User system
setting Description Factory default setting (bold) and setting range
Temperature
scale
Set the Home Comfort Control
to Fahrenheit or Celsius mode
Fahrenheit
Celsius
Screen lockout Screen lockout level
OFF : No lockout
Full lockout
lockout is set to partial lockout)
Allow changes to Fan Mode, System Mode and Setpoints
Allow changes to Fan Mode and Setpoints only
Allow changes to Setpoints only
Max Temp Setpoint
Change in Lockout
Select temperature setpoint
screen lockout is set to partial)
3 degrees
0 to 20 degrees
Max Dehum
Setpoint Change in
Lockout
Select dehumidification setpoint
screen lockout is set to partial)
5 percent RH
0 to 15 percent RH
Events per day
per day.
4 events per day
2 events per day
