Chapter 2 Avaya P330-ML Layer 2 CLI Commands
142 Avaya P330-ML Reference Guide
show ip access-list-summary
User level: user, privileged, supervisor
L This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the show ip access-list-summary command to display a summary of
policy lists.
The syntax for this command is:
show ip access-list-summary
Example:
show ip route
User level: user, privileged, supervisor
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
P330-N>show ip access-list-summary
The policy lists summary:
default List (0)
P330-N>show ip route
Destination Gateway
------------- -------------
0.0.0.0 149.49.54.1
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
