16 LongView IP KVM Extender Installer/User Guide
15. Press 1 to select Transmitter IP Address and press Enter. Type the new IP address for the
transmitter. Press
Enter to return to the Transmitter IP Configuration Menu.
16. Type 0 (zero) and press Enter to return to the Network Configuration Menu.
17. If you made a mistake and do not wish to save the changes you made to the network settings
type
C and press Enter.
18. To confirm your changes and apply those settings, type 0 (zero) and press Enter.
19. The receiver will now automatically reset to apply the new network configuration. You will be
automatically returned to the Appliance Selection Menu screen. The connection to the
transmitter will be automatically restored.
To configure network settings for the receiver:
1. Activate the serial menu as described in Accessing the serial menu on page 12.
2. Press 1 to access the Receiver Menu and press Enter. If the password option is enabled, you
will be prompted for a password. See
Authentication on page 20.
3. Type the password and press Enter. The Receiver Main Menu will appear.
Figure 3.6: Receiver Main Menu
