Beko WM 6133 W Manual

A SERVICE OF

next previous

20 EN

program is started by pressing the

“Start/Pause/Cancel”buttonafter

making the time delay selection.

CMorelaundrymaybeloaded/

removed during the time delay

period.

Changing and canceling the time

delay.

1.Pressthe“Start/Pause/Cancel”

button to switch the machine to

“Pause”mode.

2.Press“Start/Pause/Cancel”button

to start the program after making the

new time delay selection.

C In the event that any of the lights

of 3-6-9 options does not light up

after selecting the new time delay,

it means that time delay function is

cancelled.

Starting the Program

1.Press“Start/Pause/Cancel”buttonto

start the program.

2.“Start/Pause/Cancel”buttonwilllight

up to indicate that the program has

started.

3.Thedoorislockedandthe“Ready”

light fades.

Progressing a program

Progressofarunningprogramisshown

through the program follow-up indicator.

At the beginning of every program step,

the relevant indicator lamp will illuminate

and the light of the completed step

will turn off. The symbol that is lit up

at the far right of the series of symbols

indicates the step that is being carried

out.

The“Wash”lightontheprogramfollow-

up indicator illuminates when “Start/

Pause/Cancel”buttonispressedafter

selectingthewashingprogram.“Spin”

lamp will light up at the final spin step.

The“Ready”lampwilllightupagain

when the program is over and the door

is unlocked.

Youcanputyourmachineinto“Pause”

modebypressingthe“Start/Pause/

Cancel”buttonwhenitisoperating.In

thiscase,“Start/Pause/Cancel”lightwill

flash.

C If the machine is not spinning, the

program may be in rinse hold mode

or the automatic spin correction

system has been activated because

of unbalanced distribution of laundry

in the machine.

Changing the program after

the program has started

Youcanusethisfeatureafteryour

machine has started to wash different

textile groups in the same batch

of clothes under higher or lower

temperatures.

Forexample;

Pressandholdthe“Start/Pause/

Cancel”buttonfor3secondsto

“Cancel”theprograminorderto

select“Cottons40”programinsteadof

“Cottons60”program.

Selectthe“Cottons40”programby

rotating the program knob.

Press“Start/Pause/Cancel”buttonto

start the program.

C The program which is selected

first will go on even if the program

selection button is moved and

another program mode is selected

whilethemachineisoperating.You

must cancel the ongoing program

in order to change the washing

program.(See,CancelingaProgram)

Selecting or cancelling an auxiliary

function/temperature/spin speed

1.Pressthe“Start/Pause/Cancel”

button to switch the machine to

“Pause”mode.

2. Change the auxiliary function’s

temperature and spin speed.

3.Press“Start/Pause/Cancel”buttonto

start the program.

C The selection to be made must be

appropriate. For example, if your

machine is on the main wash cycle,

you may select additional rinse

auxiliary function, but you cannot

select pre-wash.

C The spin speed and temperature

which are selected first will keep

on being valid even if the position

of the spin speed or temperature

selectionknobischanged.Press