A SERVICE OF

logo

Open as PDF
next previous
21 EN
“Start/Pause/Cancel”buttonand
switchthemachineto“Pause”mode
in order to change the spin speed
or temperature. New spin speed or
temperature can be selected.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started,putthemachineinto“Pause”
modebypressingthe“Start/Pause/
Cancel”button.The“Ready”lampon
the program follow-up indicator will light
up after 1-2 minutes if the water level in
the machine is suitable. Laundry may be
added or taken out by opening the door.
Ifthe“Ready”lampdoesnotlightup
continuously at the end of this time, the
water level in the machine is not suitable
andlaundrycannotbeadded.Youcan
resume the program by pressing the
“Start/Pause/Cancel”buttonagain.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on.
C Yourmachinecanbeturnedonand
offwithOn/Offbuttonwhilethechild-
proof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
new program can be selected or started
after“Programiscancelled”inorderto
change the washing program.
Tocancelanyselectedprogram;
• Press“Start/Pause/Cancel”button
for 3 seconds. At the end of this
time,“Start/Pause/Cancel”light
andalllightsgooffand“Spin”lamp
illuminates. If the door is unlocked, all
lights on the indicator will go off and
the“Ready”lampwillilluminate.You
can select and start a new program
whenthe“Ready”lightislit.
• The machine can drain all the water
or can take in water for 3 times at
most to cool down the clothes and
complete the draining process. Also
the“Spin”lightilluminatesifthe
cancellation process is activated in
themiddleoftheprogram.The“Spin”
light goes off when discharging
process is completed. The door can
be opened and a new program can
beselectedwhenthe“Lid”lamp
illuminates.
End of program
The“Ready”lampontheprogram
follow-up indicator will light up when
the program comes to an end. The
door can be opened and the machine
becomes ready for a second cycle.
Pressthe“On/Off”buttontoshutdown
the machine.