67
G Wireless Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
To restrict Internet access to a single computer for example, enter the IP
address of the computer you wish to restrict access to in the IP fields�
Next, enter “80” in both the port fields� Select “Both”� Select “Block”�
You can also select “Always” to block access all of the time� Select
the day to start on top, the time to start on top, the day to end on the
bottom, and the time to stop on the bottom� Select “Enable”� Click
“Apply Changes”� The computer at the IP address you specified will now
be blocked from Internet access at the times you specified� Note: Be
sure you have selected the correct time zone under “Utilities> System
Settings> Time Zone”�
Setting MAC Address Filtering
The MAC address filter is a powerful security feature that allows you
to specify which computers are allowed on the network� Any computer
attempting to access the network that is not specified in the filter list
will be denied access� When you enable this feature, you must enter
the MAC address of each client (computer) on your network to allow
network access to each�
