En
9
Hardware Installation (continued)
6. Connect the first computer's mouse cable to the OmniView
™
PRO. If using a
PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port
on the computer, and the other end to the PC1 PS/2 mouse port on the back of
the OmniView
™
.
If using a serial mouse cable (Belkin Part# F2N209-XX-T), connect the female
end to a DB9 serial port on the computer, and the male end to the DB9
female end of F1D116xMSE combo mouse adapter. Then connect the PS/2
end of the combo mouse adapter to the PC1 PS/2 mouse port on the back of
the OmniView
™
.
7. Connect the first computer's keyboard cable to the OmniView
™
PRO. Using
another PS/2 cable (Belkin Part# F2N036–XX), connect one end to the PS/2
keyboard port on the computer, and the other end to the PC1 keyboard port on
the back of the OmniView
™
PRO. If your computer has an AT-style keyboard port,
you will need a PS/2-AT keyboard adapter (Belkin Part# F2N018).
8. Double check all of the connections. Make sure the keyboard and mouse cables go
to the correct ports.
9. Repeat steps 5-7 for the remainder of the computers.
F2N036-06
Back of PC
Back of PC
Back view of OmniView
™
PRO
Back view of OmniView
™
PRO
F1D116xMSE
F2N025-XX-T
F2N036-06
For Serial Mouse
For PS/2 Mouse
