A SERVICE OF

logo

13Setting up the sewing computer
Bobbin case
To remove the bobbin case
raise the needle
turn power switch to «0»
open the bobbin cover
grasp the latch of the bobbin
case
remove case
To insert the bobbin case
hold the bobbin case latch
the finger on the case should
point upwards
insert so that it clicks into
place
Bobbin thread cutter
insert the bobbin case
take the thread over cutter A
thread is cut
close the bobbin cover
Note:
The bobbin thread does not
have to be brought up as
the loose end is just the right
length to start sewing.
Refer to the safety instruction!
A
activa 125 (GB) 4.12.2002 14:16 Uhr Seite 13
030595.50.04_0201_a125_EN