15Setting up the sewing computer
Changing the presser foot
Changing the presser foot
sole
•
raise the needle and the
presser foot shaft
•
turn power switch to «0»
•
press the button on the shaft
to release the sole
Attaching the presser foot
sole
•
place the presser foot sole
under the shaft so that the
peg sits under the opening of
the shaft
Refer to the safety
instruction!
Collapsible vertical spool pin
•
found on the back of the sewing computer
behind the handwheel
•
essential aid for sewing with more than one thread, i.e. double
needle work
•
raise the pin until it clicks into its vertical position
•
when using large reels, add the foam pad A for stability
Supplementary spool pin
A
•
lower the presser foot lifter
and the foot sole will click
into position
activa 125 (GB) 4.12.2002 14:16 Uhr Seite 15
030595.50.04_0201_a125_EN
