36
Switching the confirmation beep
on/off
The system will play a confirmation beep
for some functions if you keep a button
pressed down for longer than two sec-
onds, for instance, when you assign a
radio station to a station button. You can
switch the beep on/off.
➮ Press the MENU button 7.
➮ Press the or button 8 repeat-
edly until “BEEP ON” or “BEEP
OFF” appears in the display.
➮ Activate/deactivate the beep using
the
buttons 8. “OFF” means
the beep is switched off and “ON”
means the beep is switched on.
When you have finished adjusting the
setting,
➮ press the MENU button 7.
Mute while telephoning
If your device is connected to a mobile
telephone, the car radio’s volume will
be muted as soon as you “pick up” the
telephone. This requires that the mo-
bile telephone be connected to the de-
vice as described in the installation in-
structions.
“PHONE” appears in the display.
ADJUSTING THE VOLUME
Radio mode
Adjusting the tuner settings
To ensure that the tuner works proper-
ly, the device must be configured for the
region in which it is being used. You can
choose between Europe (EUROPE),
United States (USA), South America (S-
AMERICA) and Thailand (THAI). By
default, the tuner is set to the region in
which the device was sold. If you en-
counter problems with radio reception,
please check this setting.
The radio functions described in these
operating instructions refer to the EU-
ROPE tuner setting.
➮ Switch the device off using button
1.
➮ Press and hold down the 1 and 5
buttons ; simultaneously and
switch on the device again by
pressing button 1.
“TUNER” is displayed.
➮ Select your tuner region using the
or button 8.
To save the setting,
➮ switch the device off and on again
or wait approx. 8 seconds. The car
sound system switches on and the
mode that was selected last is acti-
vated (radio, CD/MP3, CD changer
or AUX).
RADIO MODE
02Calg/SanDiegoMP35_gb• 09.02.2005, 13:50 Uhr36
