108
Note:
After you have programmed a
playlist and exited the menu with
“EXIT”, the playlist is not saved.
Stopping the playlist
To end a running playlist,
➮ Press the PROGRAM button K
on the remote control.
The programming mode is displayed.
The selection mark is positioned on
“STOP”. To end the playback of the
playlist,
➮ press the ENTER button >.
Notes:
● If you selected “STOP” and con-
firmed it with the ENTER button
>, the playlist is deleted.
● If you want to exit the display of
the playlist without deleting the
playlist, mark “EXIT” and confirm it
with the ENTER button >.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments in CD mode,
➮ press the TRAF button 8.
The priority for traffic announcements
is activated if the display shows the traf-
fic jam symbol. For further details,
please read the chapter entitled “Traf-
fic information”.
Ejecting a CD
➮ Press the button 2.
The control panel opens out towards
you.
➮ Press the eject button next to the
CD compartment.
The CD is ejected.
➮ Remove the CD and close the con-
trol panel.
Notes:
● If a CD is ejected, the drive will
automatically draw it back in again
after approx. 10 seconds.
● CDs can also be ejected if
another audio source is active.
CD MODE
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr108
