![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/9b/69b5da13-f185-4004-a916-261890fb5e5e/69b5da13-f185-4004-a916-261890fb5e5e-bgb.png)
11
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Activating the PaX function
To activate the function you have programmed
on the PaX button,
➮ press the PaX button briefly.
Controlling/adjusting the volume
Controlling the system volume
Once the Radiophone has been switched on,
it will play at the pre-defined power-on vol-
ume.
➮ To increase the system volume, turn the
volume control to the right.
➮ To decrease the system volume, turn the
volume control to the left.
The volume level selected will appear in the
display.
Adjusting the power-on volume
(Volume FIX)
➮ Press OK to access the DSC menu.
➮ Press / to select the menu item
Radio
.
➮ Press OK.
➮ Press / to select the menu item
Volume FIX
.
➮ Press OK.
➮ Press / or turn the volume control
knob to adjust the Radiophone to the de-
sired power-on volume level.
➮ Press OK.
➮ Press SRC to exit the DSC menu.
If you select the
Last Volume
option, the
power-on volume will be the volume last set
before the Radiophone was switched off.
Adjusting the beep volume
You will hear a beep whenever you activate
functions that require you to press a button
for longer than one second.
You can set the beep volume to a level from
0 to 9.
➮ Press OK to access the DSC menu.
➮ Press / to select the menu item
Setup
.
➮ Press OK.
➮ Press / to select the menu item
Beep
.
➮ Press OK.
➮ Press / to adjust the Radiophone to
the desired volume level.
➮ Press OK.
➮ Press SRC to exit the DSC menu.
Adjusting the volume for traffic
announcements (TA Volume)
You can adjust the volume for traffic an-
nouncements and for the message that there
is no traffic radio station currently available.
The traffic announcement will be broadcast
at this volume, even if the system volume is
lower.
➮ Press OK to access the DSC menu.
➮ Press / to select the menu item
Radio
.
➮ Press OK.
➮ Press / to select the menu item
TA volume
.
➮ Press OK.
➮ Press / or turn the volume control
knob to adjust the Radiophone to the de-
sired volume level.
➮ Press OK.
➮ Press SRC to exit the DSC menu.
BASIC FUNCTIONS