40
Entering the power-on
message
After you switch on your device, the
system displays a scrolling message in
the display. The factory default for this
text is “BLAUPUNKT-THE ADVAN-
TAGE IN YOUR CAR”. Instead of this
you can enter your own text up to 35
characters long.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VARIOUS” display item.
➮ Press the softkey 5 assigned to
the “ON MSG” display item.
The default text for the power-on mes-
sage appears in the display. The text
input marker flashes at the beginning
of the line.
To enter a different text,
➮ press the joystick 8 to the left or
right to move the input marker.
➮ Enter the letter that you want by
pressing the joystick 8 up or
down.
➮ Once you have finished entering
the message, press the joystick
OK 8 or the MENU button 9 to
close the menu.
The settings are saved.
Displaying the serial
number
You can display the device’s serial
number.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VARIOUS” display item.
➮ Press the softkey 5 assigned to
the “SER NUM” display item.
The device’s serial number will be dis-
played in the top line of the display.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
POWER-ON MESSAGE
SERIAL NUMBER
