99
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
• POSITION MARK
• GPS STATUS
• TRAFFIC AHEAD
• TIME INFO
• LOCATING
To programme the macro button, proceed as follows:
1 Press and hold the macro button 4 until the macro button setup menu
opens or
if you are in a main menu,
1 press the MENU button : twice.
✔ The unit switches to the setup menu.
If the setup menu of an audio source or the navi menu is already active,
1 press the MENU button : once.
✔ The unit switches to the setup menu.
2 Move the selection marker to the MACRO BUTTON menu item.
3 Press the OK button 8.
✔ The MACRO BUTTON setup menu opens. The selection marker is positio-
ned over the first item in the list, and the function that is currently assi-
gned to the macro button is indicated by an arrow.
If you want to assign another function to the macro button,
1 use the / buttons on the rocker switch 7 to select the required
function and
2 press the OK button 8.
✔ The function assigned to the macro button is changed and the main set-
up menu opens. The symbol for the newly assigned macro button chan-
ges.
Press the ESC button < to return to the initial menu.
MACRO BUTTON
ROUTE GUIDANCE
TA-FUNCTION
ROUTE OPTION
LAST 10
DEST. MEMORY
MACRO BUTTON
DEST. MEMORY
LAST 10
POSITION MARK
GPS STATUS
TRAFFIC AHEAD
