A SERVICE OF

logo

Open as PDF
next previous
Setting the Secure Watermark Mode
6-65
6
System Manager Settings
● If you select [Copy Set Numbering]:
❑
Enter the starting number using - (numeric keys) ➞ press [Next].
● If you select [Serial Number]:
❑
Press [Next].
NOTE
The serial number that is displayed in the Job/Print Status Display Area when you
press (Counter Check) on the control panel is printed.
● If you select [ID/User Name]
❑
Press [Next].
NOTE
•
If you are using a login service, the name of the Department ID/User logged in is
printed.
•
If you are not using a login service, the "COPY" watermark is printed.