328
You can register current camera settings, such as the shooting mode,
menu functions, and Custom Function settings, as Custom shooting
modes under the Mode Dial’s <w> and <x> positions.
1
Select [Custom shooting mode
(C1, C2)].
Under the [54] tab, select [Custom
shooting mode (C1, C2)], then press
<0>.
2
Select [Register settings].
Select [Register settings], then
press <0>.
3
Register the Custom shooting mode.
Select the Custom shooting mode to
be registered, then press <0>.
On the confirmation dialog, select
[OK] and press <0>.
The current camera settings (p.329, 330) will be
registered under the Mode Dial’s C* position.
If you change any setting while you shoot in the <w> or <x> mode,
the Custom shooting mode can be automatically updated to reflect the
changed setting(s). To enable this automatic update, in step 2, set
[Auto update set.] to [Enable]. The settings that can be automatically
updated are listed on pages 329 and 330.
In step 2, if you select [Clear settings], the respective Mode Dial
position will revert to the default setting effective before you registered
the camera settings. The procedure is the same as step 3.
w Register Custom Shooting ModesN
Automatic Updating
Canceling Registered Custom Shooting Modes
