Shooting
69
• You are recommended to set the shooting mode to and
the exposure compensation setting to zero (±0) before
setting a custom white balance. The correct white balance
may not be obtained when the exposure setting is incorrect
(image appears completely black or white).
• It is also advisable to use the LCD monitor to compose the
shot and to zoom in to the telephoto end setting.
• Since the white balance data cannot be read in
and
mode, preset the white balance in another shooting mode
first before selecting the
or
mode.
• Set the flash on or off when setting a custom white balance.
The white balance may not be accurate if the setting
conditions and shooting conditions are not the same.
If the flash fires when setting a custom white balance with
the flash set to
or , ensure that you also use the flash
when you go to shoot.
05-124usCUGE_060_073_GM.p65 7/26/02, 11:16 AM69
