94
Printing
Connecting a Printer
You can make clear prints swiftly and easily when you connect the
camera to a direct print function compatible printer (sold separately) or
a direct print function compatible BJ printer (sold separately). You can
also print using DPOF print settings.
• You are recommended to use the optional AC Adapter Kit
ACK500 (sold separately) rather than the battery pack to
power the camera when it is connected to a printer. If you
do use a battery pack, ensure that it is fully charged and
monitor the battery charge while printing.
• Please see the System Map supplied with your camera for
the list of direct print function compatible printers.
• Please see your printer’s user guide for information about
installing paper and ink cassettes/tanks.
Connecting to a Direct Print Function Compatible Printer
Your printer should come equipped with two direct interface cables. To
connect to this camera, please use the cable (DIF-200) that has the
symbol on its connector.
• Attach the power cable to the printer
and insert its plug into a power outlet.
• You can also power the printer with a
rechargeable battery if it is so equipped.
Please see your printer’s user guide.
Shut the camera’s
power off (p. 26).
To an Electrical
Outlet
▲
07-124usCUGE_090_110_GM.p65 7/26/02, 11:23 AM94
