84
You can select a specific person's face to focus on and then shoot.
Register 0 to the c button
(p. 136).
Set the Face Select mode.
● Point the camera toward the face and
press the c button.
After [Face Select: On] displays, a face
frame will appear around the face
detected as the main subject.
● Even if the subject moves, the frame will
follow the subject within a certain range.
● If a face is not detected, will not
appear.
Select the face on which to focus.
● If you press the c button, the frame will
move to another face detected by the
camera.
● When the frame has scrolled through all
the detected faces, [Face Select: Off] will
display, and the frame or frames for the
current AF setting will appear.
Shoot.
● Press the shutter button halfway. The face
frame of the selected face will change into
a green .
● Press the shutter button fully to shoot.
0
Selecting the Person to Focus On
(Face Select)
Confirming the number of detected faces
Keeping the c button pressed will display the number of faces detected by the
camera (35 at the most) (green: main subject’s face, white: detected face).
(EC256)_CDI-E404_Guide_E.book Page 84 Friday, February 6, 2009 7:44 PM
