Changing the Color and Shooting
92
Y Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Select Y.
● Follow Step 2 on p. 56 to select Y.
Press the l button.
● The unchanged image and the Color
Swap image will both display.
● The default setting is to change green to
gray.
Specify the color to be swapped.
● Position the center frame so it is filled with
the color you want and press the q button.
The specified color will be recorded.
Specify the target color.
● Position the center frame so it is filled with
the color you want and press the r button.
The specified color will be recorded.
(EC256)_CDI-E404_Guide_E.book Page 92 Friday, February 6, 2009 7:44 PM
