150
You can automatically correct red eyes in images and save them as new files.
Choose [Red-Eye Correction].
● Press the n button to choose [Red-
Eye Correction] in the 1 tab, then press
the m button.
Choose an image.
● Press the qr buttons or turn the Ê dial to
choose an image.
Correct the image.
● Press the m button.
XRed-eye detected by the camera will be
corrected and a frame will appear around
the corrected portion.
● You can magnify or reduce the size of the
image using the procedures in “Magnifying
Images” (p. 131).
Save as a new image and display.
● Press the opqr buttons or turn the Ê
dial to choose [New File], then press the
m button.
XThe image will be saved as a new file.
● Follow Step 5 on p. 146.
Correcting the Red-Eye Effect
• Some images may not be corrected properly.
• When [Overwrite] in Step 4 is chosen, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
• RAW images cannot be corrected.
• Red-eye correction can be performed on JPEG images shot in , but
the original image cannot be overwritten.
