Using an Externally Mounted Flash (Sold Separately)
185
Set [ND Filter] to [On].
● After pressing the m button, press the
op buttons to choose , then press the
qr buttons or use the
Ê
dial to choose
.
Configure the externally mounted
flash.
● Follow Step 4 on p. 181. to make settings.
Shoot.
● You can shoot in E-TTL automatic flash
exposure compensation mode by setting
the camera to either G, B, or M
modes.
● When the scene is too bright, set the
aperture values in B or D, then shoot.
• Be sure the cords from the Off Camera Shoe Cord, Macro Ring Lite or
Macro Twin Lite do not obstruct or interfere with the flash.
• While shooting with a tripod, adjust the direction of the camera so that
the flash heads do not contact the tripod or bracket.
• Depending on the placement of the controller, it may come into contact
with the LCD monitor.
• Use the screen for shooting. The viewfinder cannot be used.
• 8 mode is not available.
