P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
The CCA-200 is a Differential input, high performance 1x2 Color Video cable compensating
Amplier in a compact chassis. A differential input amplier is used to minimize or
eliminate ground loop problems along with adjustments for Gain, HF compensation and
Cable compensation. The CCA-200 includes a 12VDC power pack but to save AC outlets
the CCA-200 also operates from 18-24VAC and can be powered off of the AC Camera’s
power transformer. Designed for +1000 foot to +5000 foot coax cable runs. For less than
1000” use the LDA-100. For 1x1 operation use only the output needed and simply leave the
unused one unterminated.
Please take the time to completely read this manual before attempting to install and align
the CCA-200.
Tools and Equipment Requirements:
·1/8” straight blade screw driver
·12VDC-18VDC power adapter, UL Listed CVS part # CVT-1230 (Included) or an
18-24VAC camera
power supply
·Four # 8 x 3/8 sheet metal screws to mount unit on wall.
·Oscilloscope if available
·75 ohm terminator with “T” connector for oscilliscope
Fig. 1
System Connections
