Installing the VoIP Intercom
Configure the Intercom Parameters
Operations Guide 930181B CyberData Corporation
21
3. After changing the parameters, click Save Settings.
2.3.3.1 Auxiliary Relay
The CyberData VoIP Intercom provides an auxiliary relay that allows you to control an auxiliary
device co-located with the Intercom via DTMF tones sent from the default dial-out extension.
Note The
three digit code for the auxiliary relay must be sent in conformance with RFC2833
DTMF generation.
Figure 2-16. Auxiliary Relay Wiring Diagram
Click on this button to save your configuration settings.
Click on this button to do an audio test. Generates a voice
message for testing the Intercom audio quality and volume.
Link to the Network Setup page.
Link to the SIP Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
Table 2-7. Intercom Setup Parameters (continued)
Web Page Item Description
1
2
3
4
+
-
DC
POWERSUPPLY
30VDC@1A
MAX.
IN
SwitchingDiode
HighPIVUltraFast
SolidState
or
Mechanical
Relay
ControlledDevice
DependingUpon
ACorDCrated
OutputContacts
Requirements
PowerSource
ACorDC
ControlledDevice
SuchAs
ElectricDoorStrike
or
StrobeLight
VoIP Intercom
()
OUT
