Epson 4000 Manual

A SERVICE OF

next previous

1-33

Handling Paper and Other Media | 33

Loading the Paper onto the Spindle

Follow these steps to attach the roll to the spindle:

1. Slide the black paper stop (flange) off the left end of the spindle.

2. Position the roll so the paper unwinds as shown, then slide it onto the

spindle:

3. Slide the movable paper stop back onto the spindle and insert it into the

end of the roll.

Make sure it is firmly fixed into the left end of the paper

roll.

Placing the Paper in the Printer

Follow these steps to place the paper in the printer:

1. Open the roll paper cover.

Note: The spindle

accommodates both

2-inch and 3-inch roll

paper cores. To switch

between different size

cores, see page 37.

Note: Avoid touching the

printable surface of

the paper as much as

possible. Oils from

y

our skin can affect

print quality.

sp4000Guide.book Page 33 Friday, October 22, 2004 5:06 PM