2-51
Printing with EPSON Drivers for Macintosh | 51
• No Color Adjustment
to disable color management in the printer
driver. Choose this mode when you use a color-managed workflow
in Photoshop or other software applications.
3. If you are using non-EPSON media and you need to fine-tune its
performance, select Paper Configuration from the pull-down menu.
You see this screen:
4. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
• Color Density lets you control the ink saturation level (for example,
when you turn off color management in your printer software).
• Drying Time per Print Head Pass lets you print with
non-EPSON media and avoid smearing the ink. You can make the
print head wait up to 5 seconds after each pass to allow ink to dry on
the page.
• Paper Feed Adjustment helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
Note: You may need to
change the Color Density
setting if your color profile
was created to optimize
D-max and color gamut.
Select the Paper
Configuration page
sp4000Guide.book Page 51 Friday, October 22, 2004 5:06 PM
