3.
4.
5.
6.
7.
8.
9.
If you are running Windows 3.1 Program Manager, open the
File menu and choose
Run.
You see the Run dialog box.
Type A:
SETUP
(or
B:SETUP,
or
D:SETUP,
etc.) in the
Command Line box and choose
OK.
If you are running Windows 95, click
Start
and then select
Run.
Select
A: SETUP
(or B :
SETUP,
or
D: SETUP,
etc.) from the
Open pull-down menu, if necessary, and choose
OK.
You see
the initial Setup screen. Choose
Continue
to accept
the default directory in which the program will install its
files. Or type in another directory and choose
Continue.
On the next screen, enter your name and a company name;
then choose
Continue.
Verify the name and company at the next screen and choose
OK.
The program begins copying files. Follow the instructions on
the screen and change diskettes as prompted (if installing
from diskette).
The setup program creates an Image-In Easy Pack program
group. When the installation is done, select any plug-ins
you may have for the program and choose
Continue.
You see a ReadMe file containing instructions for installing
the FotoTune LE program that comes with Image-In on
separate diskettes. Follow these instructions later to install
FotoTune. For now, choose
OK.
10. At the next screen, choose
OK
again and remove the last
diskette from the drive (or the CD from the CD-ROM drive).
11. If you are running Windows 3.1, double-click the
Image-h
for Epson
icon in the Image-In Easy Pack program group.
14
