Sawgrass Technologies, Inc. SubliJet IQ
®
Getting Started Guide for the EPSON Stylus D88
9
Before you Begin
Quick Connect II™ Set-up for the D88
1. Check to ensure that you have all of the components necessary to
setup your Quick Connect II™ system.
2. Place the Quick Connect II box on a level surface next to where your
printer is going to be placed. It should be on the left hand side of your
printer with the clamps facing towards the front.
Components
1. Ink Cartridge + tubes
2. 1 x Long Tube Grip
3. 1 x Short Tube Grip
4. 4 x Ink Bags
5. Small primer bottle
6. Ink Box
7. Chips
8. Foam Block
9. Power Driver CD
(Not Shown)
10. Printer
It is crucial that the OEM ink supplied with
your printer is installed before you attempt
to install your SubliJet IQ™ inks. This allows
for two things: First, it primes the ink
delivery system, ensuring that the SubliJet
IQ™ ink will load more easily. Second, it
familiarizes you with the basic operation of
your printer. Please see the EPSON Stylus
D88 Printer User’s Guide for instructions on
installation.
For more detailed instructions please refer to the Video Installa
ion Guide on your PowerDrive
™
C
Your ink bags should never be elevated above
the print head. Keeping the bags beside the
printer at the same level assures the ink delivery
system will operate properly.
