A SERVICE OF

logo

Installing a memory module
1. Turn off the printer.
w
Warning:
To avoid electrical shock, do not attempt to install a
SIMM unless the printer is turned off.
2. Unplug the power cable from the electrical outlet.
3. Pull out the paper cassette, if necessary.
4. Turn the printer so its right side faces you.
5. Open the printer cover by pressing the latch on the left side of
the printer.
6. Remove the printer’s side cover.
2
3
1
24
L
KTWK Rev.B
Reference Guide
A5 size Chapter 3
’97/12/11 DR, pass 0
3-8
Options