2-5
Printing with EPSON Stylus RIP for Macintosh
◗
Raster Spool Mode
This checkbox turns the raster image spooling feature
on and off —the default setting is off. Raster Spool
Mode is recommended only when you frequently print
multiple copies of the same page.
In Raster Spool Mode, the Stylus RIP Monitor appears
on your screen when you print. See page 2-17 for more
information.
Note:
The Timeout, Network Name, and Job Priority settings go into
effect when you click OK and exit the Preferences dialog box.
However, you must exit and restart the Stylus RIP Server
software before a change to the Raster Spool Mode setting
can take effect.
3. Click
OK
to accept the changes.
Setting Up Your PostScript Printer
Before you can print with the EPSON Stylus RIP software
from any Macintosh, you need to set up the Chooser and select
the correct PostScript Printer Definition (PPD) file on the
Macintosh you are printing from.
You should double-check these settings before printing to the
Stylus RIP Server, especially if you regularly print to different
printers on a network or save PostScript print files for printing
on printers not connected to your network.
Nflight.bk Page 5 Friday, September 1, 2000 8:32 AM
