A SERVICE OF

logo

Open as PDF
next previous
1
1-14 Setting Up the Printer
Running a Printer Check
You can use the printer check to make sure that your printer is operating correctly.
Running the check before you connect the printer to the RIP verifies that the printer
itself is functioning.
T
O
RUN
A
PRINTER
CHECK
:
1. Make sure the printer is turned off.
2. Make sure letter-size (or larger) paper is loaded in the main paper tray.
3. Hold down the Reset button and press and hold the
P
Operate button to turn
on the printer.
Release both buttons when the
P
Operate
light comes on.
The printer prints one page showing a series of nozzle check patterns, the version of
your printer’s ROM, and the printer’s default settings, as in the following example:
4. Press the
P
Operate button to turn off the printer.
5. Check the printout.
• If the printout looks like the example above, your printer is operating correctly.
Press to run printer check.