A SERVICE OF

logo

5-141
Maintaining and Transporting the Printer | 141
2. Push down on the side pin while turning the latch to the left.
3. Close the front cover. The cutter moves to the home (far right) position.
Replacing the Maintenance Tanks
The maintenance tanks store ink that gets flushed from the system during
the initial ink charge and manual and automatic print head cleaning. The
three maintenance tanks are located on the back of the printer as shown:
Note: The print head
nozzles may dry out while
you replace the cutter
blade, so make sure you
run a nozzle check after
you are finished. See
page 130 for instructions.
Right tank
Center tank
Left
tank