A SERVICE OF

logo

Open as PDF
next previous
1-46
46 | Setting Up the Printer
Configuring the Printer for Your Network
If you have not already configured the printer using the control panel (or if
you need to change its configuration), you can use EpsonNet Config.
1. Turn on the printer.
2. Start EpsonNet Config.
The EpsonNet Config program searches for all Epson printers on the
network and displays the MAC address for each printer that it finds, for
example:
3. Highlight the printer that you want to configure and click
Configuration to access the TCP/IP selection screen.
4. If necessary, contact your network administrator for instructions on
assigning an appropriate IP address.
For more information, see the Epson Network Guide on your computer or on
the printer CD-ROM.