A SERVICE OF

logo

VNR 100 • Reference Information 25
Attaching the rack rails to a Telco rack
The Telco rack has one vertical post in the middle of each side.
2
2
Outer Rail Assembly
Rack Mounting Rail
Rail Mounting Brackets
Figure 20. Attaching Rack Rails to a Telco Rack
1. Assemble the rack rail as described in the section above.
2. Secure two rail mounting brackets to each rail assembly.
3. Align the flanges of the rail mounting brackets with the vertical posts of the Telco rack.
4. Secure the rail assemblies to the Telco rack with the provided mounting screws.