CHAPTER 1 Installation Data
1.3 Installation Specifications
12
1.3.4 Installation Specifications (PCI_Box)
TABLE 1.5 Installation Specifications (PCI_Box)
[mm (in)]
for air
conditioner
Max. calorific value [kJ/h (BTU/h)]
(ft
3
/min)] (*3)
FAN medium speed (Normal)
and Humidity
condition (*4)
operation
Max wet bulb temperature [°C
(°F)]]
(*6)
Max wet bulb temperature [°C
(°F)]]
(Included in
installation)
Acoustic power level [B] (*8)
(Included in
installation)
e Vibration
[m/s
2
(gal)]
At the time of operation (Including standby)
4.0 (400) (Composite
seismic wave)
(Composite seismic
Permissible dust level [mg/m
3
]
Supply
conditions
Input voltage and source resultant pulse number
100 to 120 VAC±10 %
Frequency and fluctuating Range
power
consumpti
on /
apparent
Inrush current [A] [Rush hours] (*11)
Less than or equal to
3.5
*1: Dimensions without protrusions.
*2: Numeric value when each optional device is mounted for maximum number of options.
*3: If the device is overloaded or if abnormality is detected even though the recommended environmental
temperature is used, the FAN rotates at high-speed.
*4: Protect from condensation.
*5: Temperature condition changes according to the installation location above sea level.
For 0 to 1000 m (0 to 3281 ft) above sea level, temperature range at the time of installation: 5 to 35°C
(41 to 95°F)
For 1000 to 1500 m (3281 to 4921 ft) above sea level, temperature range at the time of installation: 5 to
33°C (41 to 91.4°F)
For 1500 to 2000 m (4921 to 6562 ft) above sea level, temperature range at the time of installation: 5 to
31°C (41 to 87.8°F)
For 2000 to 3000 m (6562 to 9843 ft) above sea level, temperature range at the time of installation: 5 to
29°C (41 to 84.2°F)
Error of + 100m in the sea level settings of the location of installation is permissible.
*6: Downtime is the condition in which the device is packed and maintained.
