viii
About Maintenance
The user must not perform repairs on this device. Contact the store where you purchased it or an
authorized FUJITSU Image Scanner service provider to have repairs done on this product.
Warning Indications Used In This Manual
Symbols Used In This Manual
Screen Examples In This Manual
The screen examples in this manual are subject to change without notice in the interest of product
improvement. If the actual displayed screen differs from the screen examples in this manual, operate
by following the actual displayed screen while referring to the User's Manual of the device application
you are using. The screenshots in this manual were captured from the FUJITSU TWAIN32 device
driver, ScandAll 21 Image Capturing Utility Software, fi-5000N Software, FUJITSU ISIS device
driver, QuickScan™ image capturing software.
This indication alerts operators to an operation that, if
not strictly observed, may result in severe injury or
death.
This indication alerts operators to an operation that, if
not strictly observed, may result in safety hazards to
personnel or damage to equipment.
ATTENTION
This symbol alerts operators to particularly important information. Be
sure to read this information.
HINT
This symbol alerts operators to helpful advice regarding operation.
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not
perform.
The drawing inside or under the circle shows the specific action that is not
allowed.
R
Outline characters on a colored background show instructions users should
follow.
It may also include the drawing that shows the specific instruction.
