7-9
<Screen B (Example of ADF Front Offset)>
3 At Screen A, if you want to let the offset
return to default, select “Yes” otherwise
“No” then press . The scanner
displays Screen B.
<Screen B (Example of ADF Back Offset)>
<Screen B (Example of FB Offset)>
<Screen C (Example of ADF Front Offset)>
4 At Screen B, press to increase the
offset or press to decrease offset.
The increment or decrement is 0.5 mm.
Then press to activate the setting.
The scanner displays Screen C.
<Screen C (Example of ADF Back Offset)>
<Screen C (Example of FB Offset)>
5 At Screen C, press to increase the
offset or press to decrease the offset.
Then press to activate the setting.
The scanner displays the next item of the
setup mode.
