![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/d7/bd704027-e29b-40aa-a547-2d233c24cef3/bd704027-e29b-40aa-a547-2d233c24cef3-bg4e.png)
70 U41243-J-Z156-1-76
Utilities Configuration software and utilities
5.4.2.2 BIOS and firmware update
You find the Software for the BIOS and firmware update on the Fujitsu-Siemens
Computers-PC Software Pool:
I Before You start an update pay attention to the notes attached to the
corresponding BIOS and firmware version.
For generate flash floppy disks the software must be downloaded by using the
utility Flash-BIOS-Download.
For updating observe the given flash sequence:
Example:
1. BMC V.26
Not necessity of user entries.
2. FRU/SDR V1.01
Ê Select
<<Load the SDR from file>>
and eventually the installed CPU frequency with
<<600 MHz and above>>
3. FPC V.18
Not necessity of user entries.
4. BIOS V.20 with User Binaries V1.03
The prompt appears often:
<<CR>>
Ê Confirm each time with Return Ú.
5. HSC V.6
Not necessity of user entries.
BMC BaseBoard Management Controller
FRU/SDR FRU- and Sensor data
FPC Front Panel Controller
BIOS with User Binaries System BIOS and FSC User Binaries
HSC FSC P-Bay with two Hot-Swap Controller