Protocol X DCA
Configuration Guide
GE Energy Services
Restricted A197-0CG-1.00-2
Full
27
Remedy:
• Ensure the specified communication port, <com_port>, is not already used in another record
in A197_COM, or by another application.
• Ensure the specified port name is supported by the hardware platform being used. Valid port
names for the D20 are COM0 to COM7. COM0 is normally used for WESMAINT.
E202: Not enough memory!!!
Cause:
• The DCA was unable to allocate enough memory to start the ANSI X3.28 DCA.
Remedy:
• Reduce the amount of memory used by this or other applications in the system.
• Contact the Customer Service Department and report this error.
E204: A child process has died, suspending...
Cause:
• One of the ANSI X3.28 DCA processes stopped unexpectedly. If this error occurs, the
system has become unstable.
Effect:
• ANSI X3.28 DCA functionality will become un-reliable.
Remedy:
• Contact the Customer Service Department and report this error.
E205: Encountered error = <x> while closing <com_port>
Cause:
• The DCA was unable to close <com_port>.
Remedy:
• Restart the system.
• If the problem persists, contact the Customer Service Department and report this error.
